Buffalo 6TB LinkStation Duo Manuel d'utilisateur télécharger pdf (Page 61)

Using your LinkStation

LinkStation User Manual 60

Restore Factory Defaults

To restore the conguration of the LinkStation, follow the procedure below.

Move the power switch to the “ON” position while holding down the function button.

The function button will ash blue for 1 minute.

While the function button is ashing blue, press it again.

The status LED will start ashing blue. It will start ashing amber when initialization begins (2

- 3 minutes).

Notes: • When the LinkStation is initialized, an IP address, an Ethernet frame size settings, and

an administrator (admin) password are initialized. If you choose not to initialize the

administrator's password on the conguration utility, only the IP address and Ethernet

frame size settings are initialized. You can initialize other items from the conguration

utility.

• If you do not want to initialize the admin password when you initialize the LinkStation,

select [Keep current admin password] in the [System] - [Restore/Format] - [Restore Factory

Defaults] screen, and click [Save].

• If you choose to not initialize the admin password from the function button, you can no

longer congure the LinkStation if you forget the password! Write your password down and

put it in a safe place.

Function Button

Move the power switch to the “OFF” position to shut down the LinkStation.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 146 147

Pas de commentaire

Buffalo 6TB LinkStation Duo Manuel d'utilisateur Page 61