Buffalo WHR-1166D Manuel d'utilisateur télécharger pdf (Page 8)

1 AOSS button

To initiate AOSS, hold down this button until the wireless LED flashes (about 3 second). Then, push or click the

AOSS button on your wireless client device to complete the connection. Both devices must be powered on.

2 Power/Diag LED (Green or Amber)

On (Green):

Power is on.

Blinking (Green):

Booting.

Off:

Power is off.

2 blinks (Amber)**:

Flash ROM error.

3 blinks (Amber)**:

Wired LAN error.

4 blinks (Amber)**:

Wireless LAN error.

5 blinks (Amber)***:

IP address setting error.

Continuously blinking (Amber)*:

Updating firmware, saving settings, or initializing settings.

* Do not unplug the AC adapter while the LED is blinking continuously.

** Turn off AirStation first, wait for a few seconds, then turn it back on.

*** WAN-side and LAN-side IP addresses are the same. Change the LAN-side IP address of the AirStation.

3 Wireless LED (Green or Amber)

On:

Wireless LAN is enabled or transmitting.

Double blinks:

AirStation is waiting for an AOSS or WPS security key.

Continuously blinking:

AOSS/WPS error; failed to exchange security keys.

Off:

Wireless LAN is disabled.

Note: The wireless LED will be green if security is enabled or amber if it is disabled.

4 Internet Access LED (Green)

On:

Router functionality is enabled and you can connect to the Internet.

Blinking:

Router functionality is enabled but you cannot connect to the Internet.

Off:

Router functionality is disabled (the AirStation is in bridge mode).

5 Router LED (Green or Amber)

On (Green):

Mode switch is in the “Auto” position.

On (Amber):

Mode switch is in the “Router” position.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 81 82

Commentaires sur ces manuels

Pas de commentaire

Buffalo WHR-1166D Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs Buffalo WHR-1166D