Buffalo 6TB LinkStation Duo Manuel d'utilisateur télécharger pdf (Page 51)

Using your LinkStation

LinkStation User Manual 50

Several RAID modes are available for LS-WXL and LS-WSXL LinkStations. LinkStations with only one

hard drive do not support RAID modes.

Note:– All data is lost when the RAID mode is changed. Back up any important data before

changing RAID modes.

– In this document, “Recovery” means putting the LinkStation back to the state it was in

before the malfunction happened. It does not mean reading data from broken hard

drives.

– When the use mode of the hard disk is changed, all the data in the hard disk gets delet-

ed. Please take back-up before changing use mode so that the important data will not

be lost.

• RAID 1 mode

Uses 2 hard drives in a mirrored array. One drive’s worth of space is usable. Identical data is written to

both drives. If one drive is damaged, data can be recovered by replacing the damaged drive.

• RAID 0 mode(LS-WXL, LS-WSXL Default Settings)

Multiple hard drives are combined into a single array. The total capacity of all drives is usable. This is

the fastest of the LinkStation’s RAID modes. If any drive is damaged, all data on the array is lost.

• Normal Mode

Each drive is accessible as a separate, individual drive. The total capacity of each drive is usable.

If any drive is damaged, all data on that drive is lost.

RAID Arrays

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 146 147

Pas de commentaire

Buffalo 6TB LinkStation Duo Manuel d'utilisateur Page 51