Buffalo WHR-1166D Manuel d'utilisateur télécharger pdf (Page 77)

Once an entry has been saved, you can make additional changes to any entry and click Apply to save them. A policy can

be turned on or off by checking the Enable box next to its Application Name.

How to Configure TCP/IP

Windows 8.1/Windows 8

To configure TCP/IP in Windows 8.1 or Windows 8, follow the procedure below.

1 Open Control Panel.

2 Click Network and Internet.

3 Click Network and Sharing Center.

4 Click Change Adapter Settings on the left side menu.

5 Right-click the network adapter, then click Properties.

6 If the User Account Control screen opens, click Yes or Continue.

7 Select “Internet Protocol Version 4 (TCP/IPv4)” then click Properties.

8 To have DHCP set your IP address settings automatically, check “Obtain an IP address automatically” and “Obtain

DNS server address automatically”.

Alternately, you can configure the settings manually. Example:

If the router’s IP address is 192.168.11.1,

IP address: 192.168.11.80

Subnet mask: 255.255.255.0

Default gateway: 192.168.11.1

Preferred DNS server: 192.168.11.1

Alternate DNS server: leave blank

9 Click OK.

Windows 7

To configure TCP/IP in Windows 7, follow the procedure below.

1 Open Control Panel.

2 Click Network and Sharing Center.

3 Click Change Adapter Settings on the left side menu.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82

Pas de commentaire

Buffalo WHR-1166D Manuel d'utilisateur Page 77