Buffalo WHR-300HP Manuel d'utilisateur télécharger pdf (Page 30)

Chapter 5:

System Settings

5.1: Wireless Configuration

Location: System > Wireless Configuration

The Wireless Configuration page allows the user to change various aspects of the wireless network . Descriptions of the

options found on this page are located below.

Important! The settings on this page have the ability to bring down the wireless network. Use with caution.

Option Descriptions:

-Enable Wireless access: This will Activate or Deactivate the wireless network

-Channel: This will change the wireless channel. By default this value is set to ” 5”

-Broadcast SSID: This will show or hide the wireless network name (SSID)

-SSID: This is the name of the wireless network

-Enable Wireless Security: This enables or disables wireless network security

-Security Type: Changes the wireless security standard. By default this is set to “WPA2”

-Key: This is the wireless network security key, used to connect wireless devices to Pandora’s Hope

-Enable MAC Filtering: This enables the MAC filtering option, which can be used to prevent devices with specific MAC

addresses from connecting to the wireless network.

-Protocol: This sets the IEEE wireless standard to be used. By default this is set to “11ng.”

-Channel Width: This changes the width of the wireless channel. By default this is set to “40MHz Upper”

-No Scan: This option enables or disable the auto-scanning functionality of the router. By default it is set to “On”

Pro version users: There will be a second radio, which will also have the settings above. This is for the 5Ghz radio.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Pas de commentaire

Buffalo WHR-300HP Manuel d'utilisateur Page 30