Buffalo WHR-1166D Manuel d'utilisateur télécharger pdf (Page 79)

Windows XP

To configure TCP/IP in Windows XP, follow the procedure below.

1 Open Control Panel.

2 Double-click Network.

3 Right-click the network adapter, then click Properties.

4 Select “Internet Protocol (TCP/IP)” then click Properties.

5 To have DHCP set your IP address settings automatically, check “Obtain an IP address automatically” and “Obtain

DNS server address automatically”.

Alternately, you can configure the settings manually. Example:

If the router’s IP address is 192.168.11.1,

IP address: 192.168.11.80

Subnet mask: 255.255.255.0

Default gateway: 192.168.11.1

Preferred DNS server: 192.168.11.1

Alternate DNS server: leave blank

6 Click OK.

Mac OS

To configure TCP/IP in Mac OS, follow the procedure below.

1 Click Apple menu > System Preferences….

2 Click Network.

3 Click the network adapter.

4 To have DHCP set your IP address settings automatically, select “Using DHCP” in the “Configure IPv4” field.

Alternately, you can configure the settings manually. Example:

If the router’s IP address is 192.168.11.1,

IP address: 192.168.11.80

Subnet mask: 255.255.255.0

Router: 192.168.11.1

DNS server: 192.168.11.1

5 Click Apply.

1 2 ... 74 75 76 77 78 79 80 81 82

Pas de commentaire

Buffalo WHR-1166D Manuel d'utilisateur Page 79